ABSTRACT Synthetic insecticides used in the management of the mealybug Diaspis echinocacti (Bouché, 1833) (Hemiptera: Diaspididae) can contaminate co-products from this plant. The use of Agave extracts and/or mineral oil is a sustainable alternative to reduce the residual effect of these chemicals in the palm production chain. The objective here was to determine the effectiveness of Agave genotype extracts applied alone or mixed with mineral oil against the cactus scale mealybug D. echinocacti. Two experiments were carried out to achieve this goal. The first one aimed to select the most promising Agave genotype extract concentration (CL80) to kill 80% of the first instar mobile nymphs of D. echinocacti (Experiment 1), and the second to determine the effectiveness of the selected extract against nymphs, pupae, and adults of different ages of this mealybug in laboratory and greenhouse (Experiment 2). The extract of the genotype Agave fourcroydes cv. Cabinho with lethal concentration (LC80) of 10.9 mL/10 mL is the most efficient in causing mortality of D. echinocacti. The lethal concentration of the A. fourcroydes cv. Cabinho killed 80% of the first instar motile nymphs and more than 74% of the nymphs, pupae, and adults of different ages of D. echinocacti in the laboratory and greenhouse followed by Agave sisalana cv. Tatuí 3. Furthermore, the mortality of this scale mealybug was higher with applications of mineral oil (Assist), alone or mixed with sisal extracts.

Abstract ‘BRS 421’ and ‘BRS 423’ are high-oleic runner type peanut cultivars, adapted to the main peanut-producing areas in Brazil and partially resistant to spotted wilt. ‘BRS 421’ has a medium cycle and large seed size, while BRS ‘423’ has a short cycle and regular runner seed size.

Abstract BRS 425 is a high-oleic runner peanut cultivar related to wild ancestral parents, partially resistant to early and late leaf spot and spotted wilt. It is large-seeded and contains 46% oil. BRS 425 is adapted to the main peanut-producing regions of Brazil.

Development of leaf spots resistant runner peanut cultivars is one of the major demands in Brazil. In the 2009/10 crop season, 12 pre-breeding progenies (LPM) were selected out of 380 plants of an interspecific BC1F3 population for leaf spots resistance and agronomic traits. In the 2010/11, the 12 LPMs were evaluated for leaf spots resistance, without fungicide sprays. The recurrent parent (susceptible control) and all LPMs were susceptible; partial resistant segregating plants were selected. Some progenies had yield, pod and seed shape similar to the control. The 12, and the 5 LPMs selected in the 2011/12 and 2012/13 crop seasons, respectively, were evaluated under appropriate disease management. Differences were detected for pod yield and weight of 100 seeds. Seed/pod weight ratio, oil content and oleic/linoleic ratio were similar to thecontrol. Individual plants were selected for pod yield and market quality. Variability detected in the first backcross generation for partial resistance and agronomic traits will be useful.

O objetivo deste trabalho foi avaliar a divergência genética em uma população segregante F3 de mamoneira no Recôncavo Baiano utilizando a técnica multivariada Ward - MLM. O experimento foi conduzido na Universidade Federal do Recôncavo da Bahia, entre abril de 2009 e março de 2010. Foram utilizados 259 genótipos descendentes de cruzamentos entre as variedades BRS 149 Nordestina, BRS 188 Paraguaçu, EBDA MPA-17, Sipeal 28 e Mirante 10. O delineamento foi em blocos completos casualizados com quatro repetições num espaçamento de 3x1 m. Avaliou-se o número de dias para o aparecimento da primeira flor feminina, estatura de planta, número de racemos emitidos, comprimento do racemo, peso de racemo, peso de fruto por planta, número de sementes por racemo, número de sementes por planta, peso de sementes por racemo, produtividade e teor de óleo na semente. Ocorreu a formação de quatro grupos, sendo o grupo I composto por 84 genótipos, o II por 142 genótipos, o III por 15 genótipos e o IV por 18. A estratégia Ward-MLM possibilitou um adequado agrupamento entre os genótipos, sendo que as variáveis que mais contribuíram para a divergência foram o peso de fruto por planta, peso de semente por racemo, produtividade e peso de racemo.

The objective of this work was to evaluate the genetic diversity in a segregating population F3 of castor bean in the Recôncavo Baiano using the Ward-MLM multivariate technique. The experiment was conducted at the Universidade Federal do Recôncavo da Bahia between April 2009 and March 2010. The 259 genotypes used were derived from crosses between the BRS 149 Nordestina, BRS 188 Paraguaçu, EBDA MPA-17, Sipeal 28 and Mirante 10 varieties. The design was in randomized complete blocks with four replicates in spacing of 3x1 m. The number of days to the appearance of the first female flower, plant height (cm), number of racemes emitted per plant, total length of the raceme (cm), raceme weight (g), fruit weight per plant (g), number of seeds per raceme, number of seeds per plant, weight of seeds per raceme (g), productivity (kg ha-1) and oil content in seeds (%) were evaluated. The formation of four groups occurred as follows: Group I with 84 genotypes, Group II with 142 genotypes, Group III with 15 genotypes and Group IV with 18 genotypes. The Ward-MLM strategy allows for an appropriate clustering between the genotypes, and the variables that contribute most to the divergence are: fruit weight per plant, weight of seed per raceme, raceme weight and productivity.

O objetivo deste trabalho foi avaliar o teor de óleo e a produção de sementes da mamoneira 'BRS Energia', submetida a doses de adubação nitrogenada e irrigação com água com diferentes índices de salinidade. O experimento foi realizado em lisímetros, em condições de campo, em delineamento de blocos ao acaso, com três repetições. Os tratamentos consistiram dos índices salinos da água de 0,4 (controle), 1,4, 2,4, 3,4 e 4,4 dS m-1, associados a 50, 75, 100, 125 e 150% das doses de N recomendadas para ensaio. A interação entre salinidade da água de irrigação e doses de N não foi significativa para nenhuma variável estudada. A salinidade da água até 1,4 dS m-1 propiciou teor de óleo das sementes de 47%. Doses de N acima de 64% da recomendada promoveram teor de óleo inferior a 48%. A maior produção de matéria seca da parte aérea foi obtida com 150% da dose de N recomendada. O incremento salino a partir de 0,4 dS m-1 aumenta o tempo para emissão do racemo primário e reduz os valores dos componentes de produção, dos quais a massa de matéria seca da parte aérea e o número de frutos são os mais afetados. Condutividade elétrica da água de até 1,9 dS m-1 e doses de N a partir de 134% da recomendada propiciam maior número de racemos.

The objective of this work was to evaluate the oil content and seed yield of castor bean 'BRS Energia' subjected to doses of N fertilization and irrigation water with different levels of salinity. The experiment was carried out in lysimeters, under field conditions, using a randomized complete block design, with three replicates. Treatments consisted of the irrigation-water salinity levels of 0.4 (control), 1.4, 2.4, 3.4 and 4.4 dS m-1, associated to 50, 75, 100, 125 and 150% of the recommended N dose for trials. There was no significant interaction between irrigation water salinity and nitrogen levels for any of the studied variables. Water salinity of up to 1.4 dS m-1 provided 47% of oil content in seeds. Nitrogen doses 64% above recommended promoted less than 48% of oil content. The highest shoot dry weight was obtained with 150% of the recommended N dose. Increasing water salinity from 0.4 dS m-1 increases the interval for emission of the primary raceme and reduces the yield components, of which shoot dry weight and number of fruits are the most affected. Electrical conductivity of irrigation water up to 1.9 dS m-1 and N levels up to 134% of the recommended dose provide a greater number of racemes.

O objetivo deste trabalho foi estudar a influência de lâminas de irrigação com água residuária e duas doses de fósforo sobre a produtividade e o teor de óleo de sementes de pinhão manso. Foi utilizado o delineamento em blocos ao acaso, em esquema fatorial 5x2, com quatro repetições com uma planta por parcela. Os tratamentos foram compostos pela combinação de cinco níveis de reposição hídrica (0,25, 0,50, 0,75, 1,00 e 1,25 do consumo das plantas) e duas doses de P2O5 (135 e 200 g por planta) por ano. A produtividade e o teor de óleo das sementes de pinhão manso foram afetados positiva e significativamente pelo nível de reposição hídrica, enquanto as doses de fósforo não tiveram nenhuma influência.

The objective of this work was to study the influence of different levels of wastewater and two doses of phosphorus on the productivity and oil content of physic nut seeds. A randomized design in a 5x2 factorial arrangement was used, with four replicates with one plant per plot. Treatments consisted of a combination of five levels of irrigation depths (0.25, 0.50, 0.75, 1.00 and 1.25 of water consumption) and two doses of P2O5 (135 and 200 g per plant) per year. The productivity and oil content of the seeds were positively and significantly affected by water depths, while phosphorus doses had no influence.

A microcontrolled, portable and inexpensive photometer is described. It uses six light-emitting diodes (LEDs) as radiation sources and a phototransistor as detector, as well as a microcontroller (PIC - Programmable Controller of Interruption). This device provided total autonomy to the proposed photometer, which was successfully applied to determination of Fe2+ in ferrous syrups and of seven clinical biochemical parameters. As the components are cheap (~U$30.00) and easy to find, the proposed photometer is an economical alternative for routine chemical analyses in small laboratories, for research and teaching. Being portable and microcontrolled, it allows doing field chemical analyses.

A lab-made interface for acquisition of instrumental analog signals between 0 and 5 V at a frequency up to 670 kHz at the parallel port of a microcomputer is described. Since it uses few and small components, it was built into the connector of a printer parallel cable. Its performance was evaluated by monitoring the signals of four different instruments and similar analytical curves were obtained with the interface and from readings from the instrument' displays. Because the components are cheap (~U$35,00) and easy to get, the proposed interface is a simple and economical alternative for data acquisition in small laboratories for routine work, research and teaching.